Louie Cyr and the Cyr Press
By Al Myers

Another OTSM lift that will be in the IAWA Old Time Strongman Championships is the Cyr Press. This lift was named after the famous Canadian Strongman, Louie Cyr. I remember when I introduced Old Time Strongman to the USAWA in 2011, and the Cyr Press was one of the original 5 OTSM lifts contested. It was very important to me at the time to have a good and proper “lineup” of OTSM lifts for the membership to get the OTSM “kickstarted”.
I put a lot of thought into these original lifts. I wanted these OTSM lifts to be true to our Mission Statement. The Mission Statement of the USAWA goes way before my time and was conceived with the original formation of the organization. Sanjiv has mentioned our Mission Statement a few times in his writings, which is something I appreciate as we need to be reminded that is the purpose of the USAWA. We often get “sidetracked” by other disagreements and distractions of the USAWA – but the Mission Statement is something we should all come together on.
So today I’m going to tell a story – about my motivations and the process I went through in promoting the Cyr Press be one of the “original five” OTSM lifts. I will talk about Louie Cyr a little, but there are other places you can read all about him. Early this morning as my wife and I were having our daily coffee hour together I told her this story which I’m gonna rehash here again in writing. Now she’s a very patient woman with me and tolerates me carrying on about things that she has no interest in, but I started to realize that she had heard enough after 30 minutes of me rambling on about Louie Cyr and the Cyr Press. So I’m hoping to have a more captive audience here – but I will keep my story shorter and just focus on the highlights.
The history of the Cyr Press in the USAWA started many, many years ago. Way before it became an official OTSM lift. I have had the good fortune of having the BEST traveling companion in attending meets together in Chad Ullom. We have traveled to meets and competitions together all over the World for over 20 years. So many I can’t even count them all. Well, we always like to do and see other things on our trips besides just lift in the meet. Several times while attending competitions at Denny’s in Lebanon PA, we would make the trip to York and visit the York Barbell Museum. This is where I got to see the ORIGINAL Cyr DB! I was mesmerized by seeing it firsthand and up-close! You could tell that it had been well used in the past, and I just imagined all the stories that dumbbell had created that no one will ever know about. It had a stubby handle with 2 hollow circular globes that could be filled with shot. It was said to weigh 202 pounds empty, and John Grimek reported that it could be loaded to over 270 pounds. Louie Cyr used this dumbbell in his shows as his Challenge Dumbbell, and the challenge he put forth was to take it overhead with one arm. He had mastered a side press type of technique with it. Now the mystery has always been how much weight did he actually press with it? Since it was shot filled – the weight of the dumbbell could vary so it might not have been filled full. John Grimek said he himself pressed it when it was loaded to 254 pounds which is quite impressive. Did Cyr do more than this?
Now I got home from that meet very motivated to make my own replica of the Cyr Challenge Dumbbell that I had just seen in the museum. It presented several challenges, one being where do you find hollow metal globes? I finally had to resort to welding two iron caps together to make my globes. The dumbbell turned out looking really good. Even better than Cyr’s dumbbell. By this point I had given up trying to make it an identical replica. It weighed a little under 100 pounds empty and could be loaded close to 200 pounds with lead shot. So not identical to the Cyr Dumbbell but as close as I could do. And I didn’t really want it to be 202 pounds empty as now I wanted to have my fun with it and if it was that heavy I would never be able to press it! I have enough “doorstops” in the gym the way it is.
I’ve never considered myself that good as an overhead presser, even before I wore my shoulders out. Being originally a powerlifter, it was never about putting things overhead. But once I got into the All Rounds I had to start implementing overhead movements into my training as a lot of the All Round lifts include this movement. I started to “play around” with my Cyr DB and it didn’t take me long to be able to press it easily when empty. The difficulties started when I started to increase the weight with the lead shot. It quickly became a completely different beast and the “just” 10 pounds of shot added made it so I couldn’t press it. With a standard DB that weight could be lifted – but NOT with the shot filled DB. The shot “moves” within the globes. It was like trying to hold onto a slimy fish with one hand after catching it! The balance gets off – and you lose the lift.
I now could see why this would make the perfect challenge dumbbell for Louie Cyr. He had the “practice” with it – knew how to adjust his technique – knew a slower side press would stabilize the db shifting weight somewhat. PLUS he had the pressing strength at that time that very few others possessed. I doubt if he ever had it loaded fully in his shows as it would be difficult when it was half filled.
Louie Cyr was a man of strength in many areas besides just pressing a dumbbell. When it came time to present the Cyr Press as an official OTSM lift in the USAWA I thought about the long-term effects of doing this. We are here to HONOR the traditions of old time weightlifters and strongmen. After all – that is part of our Mission Statement. We have fulfilled that by naming a lift that involves putting a heavy dumbbell overhead after Louie Cyr! He will forever be remembered in the USAWA as a great dumbbell presser!
I will have my Louie Cyr DB replica out for display during the competition for the IAWA OTSM Championships at the Dino Gym. It has not been touched for years. I don’t even remember what it weighs or if I ever weighed it – and I’m going to keep it that way. The last time it was used was when I was training with it and that weight was my top weight press with it. Every session I would just add some more shot until finally I reached a point where I said, THAT’S ENOUGH! It’s nowhere loaded up to the Cyr weight, or even close to the Grimek weight but will be a good challenge if anyone is up for it.
So put December 5th on your calendar – come to the Dino Gym – lift the Dino Gym’s Cyr replica – and become part of the USAWA Old Time Strongman history!!!