Tag Archives: JWC

Can you Cheat on the Cheat Curl?

 by Thom Van Vleck

I love me some Cheat Curl! There may be some rule changes that bring the USAWA in line with IAWA rules that will open this up for lots of new records!

The Cheat Curl will be contested at the 2011 USAWA Nationals held June 25 and hosted by the Jackson Weightlifting Club in Kirksville, Missouri.  An interesting paradox will take place with this lift.  As always, the USAWA annual meeting will take place.  This is the one time when rule changes can be discussed, voted on, and passed.  Interestingly enough, one of the lifts being contested is the Cheat Curl.  The USAWA rules currently are different from the IAWA rules and there is a proposal to change the USAWA rules to bring them in line with the IAWA rules.  One of the major differences is the USAWA requires the feet to stay flat on the floor while the IAWA rules allow for the heels to raise.  So, according to the USAWA rules if you did a Cheat Curl following the IAWA rules…you’d be CHEATING?  So I guess it is possible to cheat on the Cheat Curl! Now, here’s where the paradox comes in.

Traditionally, the rules meeting has taken place after the meet.  Since the meeting can be lengthy and since there’s usually a banquet of some sorts afterwards Al Myers and myself decided to have the meeting the night before the meet.  That way, we get the “business” out of the way and the day of the meet only focuses on the lifting and the fun afterwards!  This has created an interesting situation.  One of the lifts being contested on Saturday may have the rules changed on Friday!  If so, then which rules apply!

Currently, the USAWA rules state:

D7.  Curl – Cheat
The bar begins on the platform, and at the lifter’s discretion, is picked up with a grip that has the palms of the hands facing up or away from the lifter. Feet placement and hand spacing is optional, but must remain the same throughout the lift.  Heels and toes must not rise during the lift. Once the lifter is upright in a standing position with the arms and legs straight, the bar on the thighs hanging at arms’ length, an official will give a
command to curl. The knees must remain locked and the legs straight during the lift. The lifter is permitted to bend at the waist, sway the body, or drop the shoulders to gain momentum of the bar. The bar may be lowered prior to the beginning of the curl. The bar must be curled from arms’ length to touching the upper chest or neck in one motion. Any downward movement of the bar during the curl is a disqualification. Once the bar is motionless, and the lifter is upright, an official will give a command to lower the bar. The lift ends when the bar returns to the platform under control by the lifter.

So, be ready for both sets of rules and we will see how this plays out!

The Long Journey to York Barbell: Part II

by Thom Van Vleck

In part I of my story about my trip to York Barbell and I detailed my trip.  Now, I’m going to share my feelings about my trip.

The current York Gym

May 28th, 1064 was the date of the Missouri State Championships in Olympic lifting.  How do I know?  Because my Uncle Wayne won that year and he told me that when he got home with the rest of the JWC gang he said I upstaged him being born that day.  He said they all headed down to the hospital to see me.  It was literally a couple blocks away.  Later, he would give me that medal because of the significance of the date he won it.  Without Wayne, I’d never been a weight lifter and I would not be half of what I am today.  Without my Uncle Phil, you could halve that again and without my Grandfather Dalton, I’d be nothing today.  So me wearing that medal was like them being there at York with me.  That medal has been to every lifting meet, highland games, strongman contest, and USAWA event I’ve ever been to, including a couple trips to Scotland where I “dipped” it into Loch Ness.

So, you can see, lifting has been a big part of my family.  It’s not about winning, it was always about getting better.  Being stronger, healthier, and self improvement.  York Barbell was always a part of that.  I practically “teethed” on a 5lb plate.  I remember taking an interest in throwing the discus and not having one, so I took a 5lb York plate out and practiced with it!  In 1963, my Uncle Wayne ordered a Jackson International set and he told me that he sold it partly out of feeling disloyal to York….plus he said his York sets (and the JWC had several by then) were superior in his mind.

Thom Van Vleck checking out the Cyr Dumbbell. My grandfather told me a story about it when I was just a kid.

But the opportunity never came up to travel to York.  Phil told me they talked about it often.  They would lift and talk about meeting Tommy Kono, John Grimek, Steve Stanko, Bob Hoffman and the rest.  They would day dream of lifting in the York Gym  with the greats and seeing where all the weights were made.  But time and circumstance intervened and the dream faded away.  Until now.

So when I went out, I had a lot riding on this trip.  I needed to soak up every detail and take lots of pictures.  I even called both of them in the museum and gave each one a walk through.  They both asked me if I saw the Sandow Statue or the Grimek statue.  They knew a lot of the stuff that was in there!

Thom with the Grimek statue....I don't think he's impressed with me.

Overall, it was a great trip.  But later, I did get a little melancholy.  York is well past it’s pinnacle.  But then again, I  remember stopping at Peary Radar’s old Ironman Headquarters in Alliance, Nebraska a few years back.  It’s all long gone and not a thing remains as is the fate of a lot of the other American barbell makers.  At least York Barbell is still there and it seems the guys that work there appreciate the history.  Mike Locondro told me that the event we attended (Wounded Warrior Project Strength Fest) was all about getting York back to were it belongs….but more than that he told me that his Uncle was John Grimek’s brother in law and to him it was not just about “company policy” but it was personal.  That gave me hope and took a little of that melancholy away.  Maybe York isn’t what it was, but it seems to be rising up again!

On a side note, I traveled 15 miles to the west of York and went by the burial place of my Great, great, great, great, great, great grandfather (yes, that’s right….6 “greats”).  He was a Lutheran pastor that has been credited with starting over 50 churches.  His home still stands and members of my distant family still occupy it.   I hope to go back some day and see some more and meet some of my relatives…the dead one’s and live one’s!

The Long Journey To York Barbell: Part I

by Thom Van Vleck

Thom Van Vleck completes the 73 year journey to York Barbell

Recently I traveled to York, Pa to the home of York Barbell to judge at the USAWA Heavy Lift Nationals.  This, however, is not a meet report but a story about a Long Journey.

Back in 1938 my Grandfather ordered his first “real” barbell set.  Oh, sure, he had been training for along time before this, since 1928 to be exact, but it was at this point he finally could afford a real barbell set to replace the bodyweight exercises, the concrete “bucket” weights, and the assorted things like anvils he would find to train with.  By that time he was married and I recall he had a real fight with my grandmother over ordering that set since they were short on cash.  But it was his dream.  I still have what is part of that set.

Then, in 1957, my Uncle’s Phil and Wayne began to train and scrimped and saved until they could order a real “Olympic” set.  There was other choice but York!  This was the classic deep dish York set.  At that time, Wayne and Phil became avid Olympic style lifting fans and at that time York Barbell was the center of it all.  When I started training, in 1977, my Uncle Wayne bought a new set to encourage me.  I remember vividly him ordering it with a mail order form and a check.  I’m pretty sure he wanted it as much as I did and it was just a good excuse to order a new set!

I have a few hundred Strength & Health and Muscular Development magazines that were published by York Barbell.  I’m not a collector, most are the magazines that my grandfather and Uncles bought off the news stand to read.  I would read these for countless hours as a kid when I started training and as a result, probably know more about York Barbell than all the people who currently work there!

So, when Al asked me to come along and be a judge, I pushed aside a chance to go to Iceland and compete in a highland games and chose to go to York.  You see, even though my family had been “York Men” since 1938, NOBODY from my family had ever been there!

So, here it was, 73 years after that first York barbell set was mail ordered by my grandfather and I was on my way to York.  I was pretty excited but at the same time, I was realistic.  I knew it was not what it was in the glory days.  But I hoped it would still be a great trip.

We arrived the morning of the contest and pulled up out front.  There was Bob Hoffman’s statue standing as proud as ever.  My grandfather used to tell me that Bob was “a little full of himself” and I had to chuckle as I looked at the statue.  Most accomplished men are a little full of themselves.  It often takes a big ego to drive great success.  I wish I could have met the guy, big ego aside, he did much for lifting and made America quite literally….a lot stronger.

The life size barbell mobile hanging in the York Barbell HQ....is that thing real!!!!

Soon, we went inside.  There was a large “Barbell Mobile” hanging from the ceiling.  Barbell plates and bars balanced from a single point from the ceiling.  Not sure if they were real….but if they were that’s a lot of weight hanging there!  Then to the right was a lifting auditorium where the hall of fame induction took place.  I walked through and into the gym area.  It was loaded with platforms and weights, much more modern than I expected but then again, this is not the “original” club where the “York Gang” trained.  That place was long gone and while we drove by the location, nothing remains of it downtown.

The York lifting auditorium

Next, I walked through the museum.  I won’t detail all of it, but while what was there was very cool, it was not as big as I expected, but still not a let down.   What was there oozed history.  I would detour through the museum many times while I was there, taking just a minute to look at something else I had missed.  I then went into the retail store, that was nice, again not as big as I expected but it had “one of everything”.  While there I picked up matching York Barbell shirts with the old style split jerk logo for me and my Uncle Wayne.  I took tons of photos so that later I could show Wayne and Phil a “virtual” tour of the place.  I didn’t go anywhere else, but looked around at the warehouse.  The foundry is gone, they don’t make anything on site anymore.   Later, we also traveled by Bob Hoffman’s old house as the sun set on my York trip and we called it a day.

Next:  Part II My feelings about my Trip.

York Barbell Shirts

 by Thom Van Vleck

Gene Thudium, JWC member in the 50's and 60's, sports his old school York Barbell T-shirt.

I don’t know about you, but I have received about 300 meet shirts in the last 30 years.  Probably 200 I competed in, the rest I was a judge, loader, spotter, scorekeeper, patron, or meet director.  I know how many because every few years I thin them out and keep the ones that have sentimental value in a special drawer, give away some, and keep the rest for workouts.  Some shirts become “lucky”…I have a good meet or workout in it and I then use it when I need some “mojo” for a contest or record day.  Some, a select few, get retired and are never worn again.  The ones I give away go to good homes, guys who are really into the lifting or throwing and really appreciate the shirts.  I gave a fellow highland gamer 75 shirts and he made it into a quilt that was pretty cool and he hung it in his living room.  I can go over and point to different designs and almost tell you how I placed, my throws, and even what the weather was like that day. 

Recently, Al and I traveled to Colorado and met with Russ Murphy, a highland games legend.  I got some really old meet shirts from him, about a dozen or so that go back 20 to 30 years.  He even had one that was from the first meet I ever competed in, in 1995.  Mine had been “retired” so I got his and now I have one I can wear, too.  Years ago, World Powerlifting Champ and the man that broke Kaz’s total record, John Ware, gave me a shirt he wore when he broke Kaz’s record.  I kinda felt like the kid in the Coke commercial getting the jersey from Mean Joe Greene.

Shirts can be pretty special.  Today some of us will be heading to York Barbell for the USAWA Heavy Lift Nationals this weekend.  I can’t wait to get there.  I also know that Al has designed the meet shirts using the  York Barbell logo.  I have a feeling this trip will be epic in many ways, mostly me traveling to the “mecca” of weightlifting for the first time in my life!  I remember seeing many photos of Gene in his York Barbell shirt and thinking I would like to have one….now I will and it will be pretty special.  But I wonder, will this shirt become a retired one, or a lucky shirt, or will I give it away…..only time will tell.

1 11 12 13 14 15 20